Skip to main content

ALUMINUM MOTORBOAT


Price: 26 300 €* (VAT incl.)

* The indicated price is valid in case of purchasing a product in Latvia from our warehouse.
The aluminum motorboat VIZON 500 is created for group fishing and water recreation. If you like the deck to be neatly organized and to have a lot of possibilties to put everything, while fishing or relaxing, then the VIZION 500 model is for you. Fishermen will appreciate the VIZION 500 model with compartments for 9 spinnings up to 2.7 meters long, an aerator for 110 liters of fish, many compartments for storing your gear and lures, spacious fish platforms at the bow and stern of the boat, T-groove for fastening various devices and spacious console for installation of echo sounders and chart plotters. If you like to relax on the water with family and friends, then a comfortable sofa, a quick-detachable table in the center of the cockpit, an awning for sun protection and even a barbecue are at your service! The aluminum motorboat VIZION 500 has excellent design, dynamics, and controllability. In the production of the VIZION 500 model, we only used high-quality materials and accessories. The VIZION 500 model embodies style, speed, reliability, and safety.

SPEED CHARACTERISTICS

Engine YAMAHA F115
Propeller pitch 17 19 21
Speed km/h (1 pers., 30+80kg) 78 81
Speed km/h (2 pers., 30+160kg) 75 76
Speed km/h (3 pers., 30+240kg) 65 73 71
Speed km/h (4 pers., 30+320kg) 64 72
Speed km/h (5 pers., 30+400kg) 60 65
  • Optimal
  • Max. speed
  • Not recommended
Motorboat VIZION 500 BLACK
Motorboat VIZION 500 RED
Motorboat VIZION 500 ORANGE
Motorboat VIZION 500 WHITE
Motorboat VIZION 500 BLUE
Motorboat VIZION 500 BLACK
Motorboat VIZION 500 RED
Motorboat VIZION 500 ORANGE
Motorboat VIZION 500 WHITE
Motorboat VIZION 500 BLUE

Technical data

CHARACTERISTIC VALUE
Total length, mm 5040
Total width, mm 2180
Hull height in midsection, mm 950
Transom height, mm 510
Thickness – bilge/board, mm 4 / 3
Hull composite material AL 5083 H111
Transom deadrise 16,5°
Load limit (weight of passengers and luggage), kg 500
Max people capacity 5
Max engine power, HP 115
Weight of rigged hull (excluding outboard motor), kg 630
Category С

Basic equipment

  • Steerage (gear, steering rope, wheel)
  • Electric wiring
  • Wiring duct for additional equipment (сable hoist, electric motor)
  • 2 sockets (12V)
  • USB socket for charging (in the glove box)
  • Two glassed-in consoles with a folding door and a gate between them (Tempered glass)
  • 4 retractable cleats, stainless
  • Trunk boxes with drainage system
  • Navigation lights
  • Parking light
  • Water pump
  • 2 foldable seats
  • 2 bases for seats of the cockpit
  • Base for a seat of the front and back part
  • 2 removable stands for seats
  • 2 seat WISE Blast Off
  • Hull coating
  • Battery switch
  • Glove box
  • 2 side rod compartments for 4 spinnings 2,7 m
  • Center rod compartment for 5 spinnings 2,7 m
  • Aerated Livewell 110 l (2 circuits)
  • Marine carpeting or vinyl finishing
  • Fuel tank 100l (tank filler neck, fuel level sender and indicator)
  • LED lighting on the deck (4 lamps)
  • LED lighting in the glove box

Option equipment

Equipment PRICE
Cockpit table + 190 €

Finishing

The inneterior and exterior surfaces of the boat VIZION 500 are covered with marine carpeting VENUS 437 SPACE. This carpeting was made exclusively for water transport exterior. It is moisture-, ultraviolet-resistant, other aggressive environment does not affect it. Easy to wash, dries quickly, keeps its form for a long time. Any stains can be easily washed off at the car wash with the help of high-pressure pulser. Decks can be finished with marine vinyl MariDeck if the client chooses so.

Compartment arrangement

  • The interior space of all the compartments in the boat VIZION 500 are finished with marine carpeting VENUS 437 SPACE. Drainage system is installed for each compartment so that your possessions are always dry.

Motorboat VIZION 500 overhed

Aerator

Capacity 110 l
Capacity with water 110 l
Pump (2)
Tap with a filter for withdrawal of water
Spraying cap
Set of hoses and fitting pieces

Front compartment 1

For storage of large things, such as: casting seats, rescue equipment, anchor, rope, other equipment. Finishing – carpet.

Front compartment 2

For storage of large things, such as: casting seats, rescue equipment, anchor, rope, other equipment. Finishing – carpet.

Technological compartment

Finish – painted.

Cockpit Spinning compartment

Meant for 5 spinning rods up to 2,7 m in length (unfolded)

Glove box with a lock

With a lighting and two USB ports for charging
Documents, keys, appliances etc. can be stored here.

Left Spinning Compartment

Meant for 2 spinning rods up to 2,7 m in length (unfolded)

Right Spinning Compartment

Meant for 2 spinning rods up to 2,7 m in length (unfolded)

Manhole

For checking the pumps, cables and any water in the bulge

Large compartment

Below folding seats
A large compartment for things, lures and gear. Below it is another compartment for two batteries.

Fuel tank neck

Equipment and finishing options

Vinyl finishing Marideck

Vinyl finishing

Price: + 0 €
The decks can be finished with marine vinyl MariDeck. Marideck is an embossed vinyl with an anti-slip dense surface.
Boat 470 design change

Boat design

Price: + 0 €
5 colors of hull sides are available – with VIZION logo chrome plated.
Seats color ATTWOOD Centric 2

Seats color

Price: + 0 €
Ergonomic seats WISE Blast Off Bass Boat Torsa Ergonomic Seat series. 5 colors are available.
Seats model ATTWOOD Centric 2

Seats model

Price: + 300 €
Standart seats can be replaced with ATTWOOD Centric 2. 5 colors are available.

COMPONENTS FROM THE BEST MANUFACTURERS ONLY

VIZION is an official dealer of the best manufacturers for aluminum motorboat accessories and equipment.
We are ready to install any equipment and accessories on your motorboat.
VIZION LOGO WHITE

Development and manufacturing
of aluminum motorboats


Limited Liability Company “FISHBOAT” has signed an agreement with Investment and Development Agency of Latvia (LIAA) on Incubation support within the framework of the ERDF Project No. 3.1.1.6/16/I/001 “Regional Business Incubators and Creative Industries Incubator” and No. SKV-L-2018/183.